PXT30APB-M

1.PXT30APB-M is a 180° board vertical injection moulding type 2PIN high current connector, the copper parts adopt lantern flower structure, as the current standard product of high current connector in lithium industry, its design also includes wire to wire to wire and board horizontal structure;
2. Widely used in high power connection scenarios between batteries, motors and electronic control, it is a stable and reliable high current connector solution for battery connection, motor connection and electronic control connection.

Detail

Pseudolaric acid：PXT30APB-M

I. Product overview

1.PXT30APB-M is a 180° board vertical injection moulding type 2PIN high current connector, the copper parts adopt lantern flower structure, as the current standard product of high current connector in lithium industry, its design also includes wire to wire to wire and board horizontal structure;

2. Widely used in high power connection scenarios between batteries, motors and electronic control, it is a stable and reliable high current connector solution for battery connection, motor connection and electronic control connection.

II. Product performance

Electrical performance
Rated current (4H cycle)	20A 14AWG 30K
	30A 12AWG 30K
	30A 14AWG 55K
	35A 12AWG 55K
	35A 14AWG 85K
	40A 12AWG 85K
Rated voltage/withstand voltage	150V（DC） 1300V（DC）
Contact resistance	≤ 1.5 mΩ
Electrical insulation resistance	≥ 3000MΩ
Mechanical property
Insertion force of finished product	≤ 4.5kgf
Finished product pull-off force	≥ 0.8kgf
Number of insertions and removals	100 times
Environmental resistance
Scorch wire rating	GWFI 850℃
Flame retardant grade	UL94 V-0
Operating temperature	-40℃ to 125℃
Salt spray	48H
Material and use
Casings	PA66 Colours: Yellow, Black, Blue
Master copper	Copper Alloy Plating: Gold Plated
Eco-friendly material	RoHS 2.0 compliant
Connection method	Soldered
Connection parameter	Refer to the Welding Instruction Manual

III. Precautions

1. It should be stored in a clean, dry and well-ventilated warehouse, away from any corrosive gases such as acid and alkali. It is recommended to keep the original package in sealed condition, please use it in time after opening and avoid long time exposure to air.
2. The storage environment temperature shall be maintained between -10℃ and 40℃, and the relative humidity shall be ≤80%, in order to avoid material aging or performance degradation.
3. This product can only be plugged and unplugged in a completely powered-off state. It is strictly prohibited to plug and unplug the product with electricity, otherwise it may generate an electric arc, which may cause damage to the product or lead to safety accidents.
4. The product is suitable for transport by conventional means of transport. Severe collision, violent vibration should be avoided during transport, and protective measures should be taken to prevent direct rain or snow shower or flooding.
5. When using the connector must be reliably fixed in the main body of the equipment, to avoid external impact or continuous pulling, and to ensure that the installation of no loosening, tampering, in order to ensure the long-term stability of the electrical connection.
6. When plugging and unplugging, please keep vertical alignment and apply force evenly, and strictly prohibit tilted operation or the use of violence. After correctly connecting, the male and female pairs of inserted plastic shells should be completely fitted without visible gaps.

Customer service

consultation