PXT90PW-M

1.PXT90PW-M is a 90° board lying injection moulding type 2PIN high current connector, as the current standard product of high current connector in Li-ion battery industry, its design also includes wire-to-wire and board vertical structure;
2. Widely used in high power connection scenarios between battery, motor and electronic control, it is a stable and reliable high current connector solution for battery connection, motor connection and electronic control connection.

Detail

Pseudolaric acid：PXT90PW-M

I. Product overview

1.PXT90APW-M is a 90 ° board lying injection moulding type 2PIN high current connector, copper parts using lantern flower structure, as the current lithium industry high current connector standard products, its design also includes wire to wire to wire and board vertical structure;

2. Widely used in high power connection scenarios between batteries, motors and electronic control, it is a stable and reliable high current connector solution for battery connection, motor connection and electronic control connection.

II. Product performance

Electrical performance
Rated current (4H cycle)	35A 12AWG 30K
	40A 10AWG 30K
	40A 12AWG 55K
	50A 10AWG 55K
	50A 12AWG 85K
	55A 10AWG 85K
Rated voltage/withstand voltage	150V（DC） 1300V（DC）
Contact resistance	≤ 1.5 mΩ
Electrical insulation resistance	≥ 3000MΩ
Mechanical property
Insertion force of finished product	≤ 7.5kgf
Finished product pull-off force	≥ 2kgf
Number of insertions and removals	100 times
Environmental resistance
Scorch wire rating	GWFI 850℃
Flame retardant grade	UL94 V-0
Operating temperature	-40℃ to 125℃
Salt spray	48H
Material and use
Casings	PA66 Colours: Yellow, Black, Blue
Master Copper	Copper Alloy Plating: Gold Plated
Eco-friendly material	RoHS 2.0 compliant
Connection method	Soldered
Connection parameter	Refer to the Welding Instruction Manual

III. Precautions

1. It should be stored in a clean, dry and well-ventilated warehouse, away from any corrosive gases such as acid and alkali. It is recommended to keep the original package sealed, please use it in time after opening and avoid long time exposure to air.
2. The storage environment temperature should be kept between -10℃～40℃ and the relative humidity should be ≤80% to avoid material aging or performance degradation.
3. This product is limited to plugging and unplugging operations in a completely powered-off state. It is strictly prohibited to plug and unplug the product with electricity, otherwise it may generate electric arc, resulting in damage to the product or causing safety accidents.
4. The product is suitable for transport by conventional means of transport. Avoid serious collision, severe vibration during transport, and take protective measures to prevent direct rain, snow or flooding.
5. When using the connector must be reliably fixed in the main body of the equipment, to avoid external impact or continuous pulling, and to ensure that there is no loosening, tampering after installation, to ensure the long-term stability of the electrical connection.
6. When plugging and unplugging, please keep vertical alignment, even force, prohibit tilting operation or the use of violence. After correctly connecting, the male and female pairs of inserted plastic shells should completely fit without visible gaps.

Customer service

consultation