Electrical performance | |
Rated current (4H cycle) | 30A 14AWG 55K |
Rated voltage/withstand voltage | 150V（DC） 600V（DC） |
Contact resistance | ≤ 1 mΩ |
Electrical insulation resistance | ≥ 2000MΩ |
Mechanical property | |
Insertion force of finished product | ≤ 2kgf |
Finished product pull-off force | ≥ 0.8kgf |
Number of insertions and removals | 100 times |
Environmental resistance | |
Scorch wire rating | GWFI 850℃ |
Flame retardant grade | UL94 V-0 |
Operating temperature | -40℃ to 125℃ |
Salt spray | 48H |
Material and use | |
Casings | PA66 Colour: Black |
Master Copper | Brass Plating: Gold plated |
Eco-friendly material | RoHS 2.0 compliant |
Wiring specifications | 14AWG |
Connection method | Soldered |
Connection parameter | Refer to the Riveting Operations Guide |
1. It should be stored in a clean, dry and well-ventilated warehouse, away from any corrosive gases such as acid and alkali. It is recommended to keep the original package sealed, please use it in time after opening and avoid long time exposure to air.
2. The storage environment temperature should be kept between -10℃～40℃ and the relative humidity should be ≤80% to avoid material aging or performance degradation.
3. This product is limited to plugging and unplugging operations in a completely powered-off state. It is strictly prohibited to plug and unplug the product with electricity, otherwise it may generate electric arc, resulting in damage to the product or causing safety accidents.
4. The product is suitable for transport by conventional means of transport. Avoid serious collision, severe vibration during transport, and take protective measures to prevent direct rain, snow or flooding.
5. When using the connector must be reliably fixed in the main body of the equipment, to avoid external impact or continuous pulling, and to ensure that there is no loosening, tampering after installation, to ensure the long-term stability of the electrical connection.
6. When plugging and unplugging, please keep vertical alignment, even force, prohibit tilting operation or the use of violence. After correctly connecting, the male and female pairs of inserted plastic shells should completely fit without visible gaps.